SLES-DE-10 SLES Dilution Systems

Sodium Lauryl Ether Sulphate (SLES) is a surfactant widely used for the manufacture of cleaning products, soaps, shampoos and even toothpaste. Thanks to its capacity as a wetting agent and emulsifier, it is also used in the cosmetic and dermopharmaceutical industry.

Traditionally, SLES is supplied at 70% or 27%. The viscosity of the product at intermediate concentrations increases significantly and it becomes difficult to handle.

Purchasing the concentrated product involves significant financial savings in product haulage and storage costs.

The SLES dilution unit lets you benefit from purchasing the concentrated product. The concentrated product can be diluted in the line directly from the truck and stocked in diluted form at 27% or stocked in concentrated form and diluted according to production requirements.


  • End product free from lumps and air in the line.
  • Reduced haulage costs.
  • Savings on space and product storage costs.
  • Amortization of the equipment in a few months.
  • Concentrated SLES is more resistant to microbiological attack and has fewer impurities.

Click here for brochure

CMC Mixing Unit

The CMC mixing unit is a skid designed for a fast dispersion of hydrocolloid products such as carboxymethylcellulose (CMC), flours, carbopol, pectin, and guar or xanthan gum. These additives are widely used in industry on account of their multiple properties: as thickeners, jellifying agents, stabilisers, complexing agents, etc. In the food industry, these additives provide texture, body, consistency and stability to food products. In the cosmetics industry they are used as thickeners, stabilisers, suspending agents and film formers in creams, lotions or shampoo.

Click here for brochure

MCR Counter-Rotating Blenders

Counter-rotating blenders are used for mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity.

These units are intended primarily for pharmaceutical, cosmetics, food and personal care products industries.

They are ideal for processes which require heating, vacuum, premixing, additions, vigorous agitation, emulsion or dispersion, as well as pressure and temperature. The skid can work at -1 to 0.5 bar and the double jacket - up to 3 bar. The operating temperature is between -7 a 120 ºC.

It is possible to control the following parameters: temperature, pressure, pH, weight and viscosity.

The unit is provided with a cleaning system with rotating spray balls in order to be connected to a CIP and SIP cleaning system.

Some examples of products that can be treated with these units are all kinds of creams, gels, sunscreens, depilatories, makeup, deodorants, sauces, pates, pastes, shoe creams, emulsions, paraffin mixtures, wax mixtures, carbopol dispersions, tooth pastes, products intended for drugstores and parapharmacies.

Click here for brochure

MBC Double Cone Solids Blender

The double cone blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as healthcare, food, chemical, cosmetics, detergents, fertilizers and plastics.

Examples of materials or substances mixed in this way include pharmaceutical granules, semolina flour, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations to make dehydrated soups and creams, leaf waxes, detergent granules, soap flakes, artificial fertilizers, plastic in powder, ground or pellet form, fibreglass, etc.

Click here for brochure

MV V-Type Solids Blender

The V-type blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as healthcare, pharmaceutical, food, chemicals, cosmetics, detergents, colorants, fertilizers and plastics.

Examples of materials or substances mixed in this way include pharmaceuticals, flour for confectionery, fish meal, refined or white flour, whole wheat flour, flour for coating, dextrins, enzymes, coffee, cocoa, milk powder, chocolate, gelatine, crème caramel and dessert powder, baby food, custard powder, starches, seeds, pigments, colorants, cosmetics, powdered or granulated plastics, fiberglass, etc.

MIX Blender skids

NOXPA's MIX type blenders have been designed specifically for mixing low or high viscosity liquid products for the food, cosmetics, pharmaceutical and chemical industries. For this reason, they are built with sanitary finish.

They are classified into five units with their respective agitators. The MIX-1 has a central anchor type agitator, the MIX-2 has a turbine with Cowles disc on the central shaft, the MIX-3 is equipped with a central blade type agitator, and the MIX-4 has both a central anchor type agitator and a radial agitator with Cowles disc. The MIX-5 is equipped with a counter-rotating agitator and a bottom-of-the-tank mixer.

Click here for brochure

SolidMix Solid-Liquid Mixing

The solid/liquid blender is designed for the dissolution of solids in the applications of the food-processing, cosmetics, pharmaceutical and chemical industries. Dissolution of sugar for the beverage production, milk reconstitution, syrup production, brine preparation, yogurt and other milk product premixtures and ice-cream production are some of its applications.

ViscoMix Mixing of Viscous Products

The range of VISCOMIX equipment is intended for production of highly viscous pharmaceutical products.

The tank is provided with counter-blades to promote mixing of the viscous product.

Its design permits operating under pressure and in vacuum. The tank is jacketed for product heating.

The ingredients are introduced through the nozzles at the top of the unit, manhole or through a valve at the bottom of the tank if the equipment operates in vacuum.

The anchor-type agitator with scrapers makes the product homogeneous and prevents the product from overheating at the wall.

If the equipment is provided with a bottom high shear mixer (ME-6100), it is possible to create high quality emulsions, dispersions or dissolution without lumps.

The agitator speed and the temperature are controlled from the electrical panel.

LiquidMix Mixing of Low Viscous Products

LIQUIDMIX is a range of equipment intended for the production of low viscous pharmaceutical products (water- or oil-based).

The tank is designed to operate under pressure and in vacuum. Product heating is provided by means of a heating jacket. The ingredients are introduced through the inlets at the top of the unit, manhole or through a valve at the bottom of the tank if the equipment operates in vacuum.

High-speed agitation is used to homogenise liquids or to dissolve highly soluble solids.

If the process requires an emulsion or a certain degree of shear, a cowler-type agitator or even a high shear mixer can be used.

It is possible to control the agitator speed and temperature from the control panel.

PharMix Preparation of Sterile Solutions

The range of PHARMIX equipment is designed for preparation of sterile pharmaceutical products.

The manufacturing processes of injection products normally require an autoclave sterilisation prior to the production process. This equipment makes it easy, as the agitator drive and the control panel can easily be removed.

The corresponding certificates of materials, surface roughness and the FDA certificate for elastomers are available.

Make an enquiry

Make an enquiry

Product News

Phase Range of Sprung Disc Check Valves

Heap & Partners Phase Check Valves have been specially designed to cover all of customer…

The Saunders IDV eXtreme Range

The Saunders IDV diaphragms are changing and will be known as the eXtreme range. The…

Corrosive & abrasive duty

Designed and developed by our in-house engineering team,

Copyright Heap and Partners Ltd 2008-2017. All rights reserved.